Install the FMU Plug-in Module into the FMU Chassis for seamless integration. The 1U Rack Mount option allows direct mounting onto a rack, while the ABS Pigtailed Module offers space-saving advantages in applications
CWDM MUX/DEMUX
CWDM MUX/DEMUX
Product introduction
AERECH CWDM MUX/DEMUX modules enable efficient combination and splitting of multi-wavelength optical signals in Coarse Wavelength Division Multiplexing (CWDM) networks. With up to 18 channels (20nm spaced) available in simplex or duplex configurations, these modules, along with reliable passive optics like CWDM SFP/SFP+, maximize fiber bandwidth utilization in local loop and enterprise architectures. The CWDM MUX/DEMUX modules are offered in three packaging options: ABS Pigtailed Box, Rack Chassis, and LGX Cassette.
Product parameters
Fiber Type
Single Fiber, Dual Fiber
Number of Channel
4-18CH
Wavelength
1270-1610nm
Channel Spacing
20nm
Housing
ABS,
LGX,
1U Rack
Extra Port
Monitor Port,
1310nm Port,
Expansion Port
Connector Type
LC/UPC, SC/UPC ,LC/APC, SC/UPC
Technology
TFF
Quality certification
Note: Installing the third-party optical module will not affect the warranty service of your network equipment, and it is also stated in the equipment user manual that the warranty service of the product will not be affected by the third-party optical module.
Product features
Enhance Flexibility: Optional Channels and Wavelengths for CWDM Solutions
Tailor your CWDM Solutions to your requirements by choosing from a set of 18 wavelengths spaced 20nm apart, spanning from 1270nm to 1610nm. Select the channels and wavelengths that best align with your needs
Three Versatile Housings for Diverse Installation Needs
LGX
1U Rack
ABS
Versatile Ports for Monitoring and Expanding Capacity
Customize your setup by choosing the monitor port to track channel power levels and the expansion port to enhance capacity. Additionally, leverage the 1310nm or 1550nm port to expand network capacity
Monitor Port
Seamlessly connect to the power meter or OPD for simplified troubleshooting
1310nm Port
Seamlessly integrate 1310nm traffic by employing compatible transceivers.
Expansion Port
Expand your system by connecting to another Mux with different channels
Diverse Connectors for Custom Installations
Personalize your 1U Rack Mount and FMU Plug-in Module Mux/Demux with LC and SC connectors to suit your requirements. For greater flexibility, the ABS Pigtailed Module Mux/Demux offers the option to order LC, SC, ST, and FC connectors
FAQ about purchasing Mux/Demux
Aerech has been manufacturing optical modules for 5 years, and we have encountered various problems, which are the most concerned problems of our customers before reaching a deal
We bought some DWDM MUX/DEMUX from you, does it support 25G/10G or only 1G?
Yes, it can support 1G/10G/25G. Mux/Demux is a passive product which has the requirement for the wavelength but not the rate.
Does insertion loss directly affect the transmission rate of WDM systems?
No, it does not affect its transmission rate, but transmission distance.
What kinds of custom choices are offered in AERECH?
AERECH can make customized solutions based on your current link condition and the final link status you want to achieve.
I want to use the C17-C20 DWDM modules, which DWDM MUX can be an option?
C17-C20 DWDM module can be used with 96ch MUX, kindly note 96CH mux is 50hz.
Which package type can be an option?
1U rack, LGX, and ABX can be options according to your chancel quantity.
We currently have our site connected using BiDi SFP+ 1330/1270 and 1270/1330. We may need to add channels for additional equipment. What are the correct ports that need to be on the MUX/DEMUX unit to allow for the existing BIDI SFP+ connections?
1310nm port can be used for BIDI SFP+ connections
Can we run a 40GBASE-ER4 signal into that 1310nm special port? Because ER4 uses four wavelengths: 1271, 1291, 1311, and 1331 nm. Those wavelengths don't clash with anything else in the mux, but I'm curious as to whether they can pass through the filter on the 1310 port.
Yes, of course, you also can run a 40GBASE-ER4 signal into the 1310nm port because the 1310nm Port Pass Band Width is 1260nm~1360nm.
Passive CWDM vs. DWDM – Which to choose?
Generally, CWDM offers a convenient and cost-efficient solution for short distances (like 70km), low capacity, and sub-10G. While DWDM supports long-haul applications with speed protocols of up to 100G/200G per channel.
aerech® would be happy
to help you
- High-quality components for reliability.
- Meticulous inspection for flawless performance.
- Cutting-edge PCB design for optimal functionality.
- Expert assembly for precise integration.
- Rigorous testing for unmatched reliability.
- Secure packaging and prompt delivery for peace of mind.
Skyrocket your sales today